Commonly, the reason for a slow draining bathtub is a clog that restricts the flow of water. How to Unclog a Bathtub Drain. How to unclog a shower drain with tub drain removal tool? Clogs are usually made of knotted hair, dirt, grease and/or soap.
They can be difficult to remove because the hair can wrap around the drain. Clogs happen more often in homes where one or more bathtub users have long hair because short hair is much less likely to get caught in the drain system.
Is your bathtub clogged? Isn’t your bathtub draining tub drain removal tool? Do you want to unclog the bathtub? The key to deal with clogged bathtub drains is likely to catch the problem first. If you take the step before the difficulty gets too bad, it’s going to be easier to solve – but if you let the blockage buildup, it’s going to be a lot harder to unclog bathtub drain by tub drain removal tool.
That’s a popular issue we’ve all encountered. Your bathtub begins to drain more slowly at first, but you assure yourself the issue will go away. And that it just gets worse and worse before you notice that it’s fully blocked one day. Your bathtub won’t drain until and unless you know how to unclog a bathtub drain. It’s understandable that at the first sign of a blockage, you don’t want to call in the plumber-costly it’s after all, but you don’t need to wait until you have a tub full of standing water to take action.
Also Watch: Best Basement Toilets that Flush Up & Pump Up Toilets
How to Unclog a Bathtub
So, here’s how to unclog bathtub drain. You have some solutions when it comes to unclog bathtub drain. Here, from the simplest and the least extreme to the last resort, we will work through them.
Use Boiling Water
Shampoo and soap can cause a gunky buildup to stop your unclog bathtub drain . To combat the problem, boil a pot of water on the stove and slowly pour it over the drain. While the tip may not be effective for all types of clogs (such as matt hair), most soaps can be dissolved fairly quickly by hot water. Try this way first to understand if it unlocks the drain, and if it doesn’t, it’s time to move to another method.
Clean the Strainers and Stoppers
Is your bathtub clogged? Isn’t your unclog bathtub drain draining tub with drain removal tool? Do you want to unclog bathtub drain ? Many drains have any kind of protection that allows the water to pass through but prevents larger objects’ disappearance down the drain hole. The issue with this is that hair can get tangled up in it, eventually preventing water passage. This suggests that the first thing you need to do is to clean this cover if your drain shows signs of being blocked.
Everything you need to do is remove any strainer or stopper that your drain has and clean off any hair buildup. If you do not screw the cover down, simply take it off and clean it. If a screw is holding it in place, unscrew it and do the same. Replace it and, to test it, run some water. You have solved the issue if the water drains away as it should. You were moving on to the second strategy, if not.
Drain Claw
The next thing to do is a drain claw if cleaning the strainer or stopper hasn’t done the trick. This is an inexpensive method for unclog bathtub drain that consist of a stick covered in tiny hooks. Remove the strainer or stopper as before and push the drain claw out of the drain. Stir it in as greatly as you can, and slowly pull it out again. The hooks on the stick hold all the clumps of your hair, allowing you to pull them out with the stick. You can repeat the process a few times until you no longer pull out the clumps of hair and gunk. If you are ready, refill the stopper or strainer and run some water to see if the blockage has been resolved. If you don’t, you can move on to the third technique.
Try Baking Soda and Vinegar
The next technique you can try is to pour boiling water into the drain with a mixture of baking soda and vinegar.
Boil a full kettle of water first and pour the whole lot into the drain. If you’re lucky, it’s just boiling water alone that will be enough to shift the blockage. If not, add half a cup of baking soda and a cup of white vinegar to the drain. Wait for the mixture to act for 15 or 20 minutes.
Boil another full kettle of water and pour it into the hole and wait for the water to drain. Run a little water to see if it worked. You may want to repeat this process two or three times. If you don’t, you can move on to the next technique.
Use a Plunger
If the baking soda, vinegar and hot water mixture do not solve the problem, even after a few attempts, the blockage is probably more severe, and the buildup is more solid. This means that a little more force may be needed – so the next thing to try is a good old-fashioned bathroom plunger. Start by filling the unclog bathtub drain with tub drain removal tool to a few inches deep. It may also help a little by using hot water rather than cold. Place the plunger over the hole and push it down and pull it up a couple of times. You’re trying to shift the blockage with the suction force, so the more vigorously you do it, the more effective it will be.
If it works, clumps of hair and other grime will begin to get sucked out of the hole. When this happens, scoop them out of the tub so they’re not going back to the hole, and they’re going to block it again.
Repeat this a few times. It’ll probably be quite obvious if you succeed because you’ll see the clumps of hair sucked out of the hole and into the tub. If it works, the water will normally drain after you have removed the blockage. If it seems to work partially, you might think of trying soda and vinegar again, and then the plunger again a few times.
Try Manual Removal
The more aggressive way to learn how to fix a clogged bathtub drain with tub drain removal tool is to remove it by hand. Before you start the process, you might want to wear a pair of latex or rubber gloves. Remove the drain cover (see any screws) and then look down into the drain to see if the clog can be detected. If you notice that your hair and other clogging materials are within reach, just use your fingers to try and pull out as much as possible.
Try a plumber’s Snake
A plumber snake is a handy clog-removing tool that can be found in almost any hardware store. Slowly push the snake down the drain until you think you’ve reached the clog. Start turning the snake handle until you get it back up and out of the drain. Once you have finished, run some water to test the drain to confirm that the clog is completely removed.
Use Chemical products
If everything other fails, you can try a chemical drain cleaner before you call a plumber. This should be a last resort because it contains strong chemicals that are bad for the environment and that will also weaken the drainage system of your unclog bathtub drain. Pick a specially made product for bathtubs, take all necessary safety precautions, such as using gloves, etc., read the guidance correctly, and do everything it states on the container. Eliminate rising water, pour the stock into the drain and wait for the time designated on the bottle.
Chemicals are not to be used lightly. They can cause damage to your drain pipes, especially if they are used repeatedly. Using chemicals is usually a fast, easy-to-use and affordable method with a relatively high success rate in my experience. However, you can reduce the need for chemicals by minimizing future blockages.